EasyManua.ls Logo

STERWINS 8VGS2-3IN1.1 - Page 258

STERWINS 8VGS2-3IN1.1
285 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
258
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
1 Handle
2 Safety lock-o button
3 Motor housing
4 Grass shear blade
5
Charging socket and steering tube’s socket
6 Charge level indicator
7 ON/OFF trigger switch
8 Blade cover
9 Hedge trimmer blade
10 Grass shear blade sheath
11 Hedge trimmer blade sheath
12 Charger
13 Charger plug
14 Steering tube’s handle
15 Steering tube’s ON/OFF trigger switch
16 Telescopic tube
17 Steering tube’s plug
18 Wheels
19 Slot
20 Position button
21 Steering tube’s safety lock-o button
22 Auxiliary Handle
*The steering tube is not supplied.
Wear gloves when unboxing.
Do not use cutter, knife, saw or any other similar tool for unboxing.
Carry the tool only by the handle 1 or 14 and 22 (with steering tube).
Keep the box for further reuse (transport and storage).
Keep instruction manual in a dry area for further consultation.
4.2 INSTALLATION
This cordless battery grass shear comes completely assembled
with the grass shear blade pre-installed.
4.3 FIRST USE
WARNING ! Read the « SAFETY INSTRUCTION » section at the
beginning of this manual including all text under subheading
therein before using this product.
The battery is not fully charged at the time of purchase.
Pay particular attention using the machine for the  rst time : focus and dedicate all your attention to this
rst use. Make the  rst trial on a free space with no obstacle and no surrounding element
4.4 OPERATION
Charge the product : illustration
3.2
to
3.4
The battery charger supplied matches the lithium-ion battery installed in the tool. Do not use other
battery chargers. The lithium-ion battery is protected against deep discharging. When the battery is
empty, a protective circuit will automatically switch OFF the product. The blade will no longer move and
a slight whistling sound will be heard. Charge the battery for 3 hours then use it until it runs down (i.e. the
tools starts to operate slowly). Recharge for 3 hours again before resuming operation.