To Next PageTo Next Page
Need help?Do you have a question about the STERWINS ECS2-40.3 and is the answer not in the manual?
Legal mentions and safety guidelines for product use.
Illustrates the initial steps of assembling the chainsaw parts.
Shows how to check or adjust the chain tension for proper operation.
Details the process of fitting the cutting chain onto the guide bar.
Explains how to attach and tighten the chain cover mechanism.
Illustrates fine-tuning the chain tension using a knob.
Demonstrates the correct method to check chain sag, aiming for 2-3 mm.
Shows how to lock the chain tension adjustment knob.
Compares correct (2-3 mm) and incorrect (>5mm) chain tension.
Lists essential safety gear for operating the chainsaw.
Illustrates how to attach the protective cover for the chain and bar.
Details the rotation of a knob to adjust chain tension.
Shows oil application and specifies a 40-minute lubrication interval.
Illustrates plugging the chainsaw into an electrical outlet.
Shows a final check of chain tension after assembly, with a 'CLIC!' sound.
Demonstrates a standard cutting method for logs.
Shows how to perform an angled cut at approximately 45 degrees.
Illustrates cutting smaller logs with specific depth measurements.
Shows how to support logs safely during cutting operations.
Compares two methods of positioning logs for cutting.
Illustrates activating and deactivating the chainsaw using red and green indicators.
Demonstrates a typical cutting posture and method.
Shows applying oil and a 40-minute interval reminder.
Illustrates a specific cutting posture for logs.
Shows the final stage of cutting through a log.
Shows how to check the chain and lists replacement part numbers like 91PX057X.
Illustrates connecting the chainsaw to power before performing maintenance.
Shows how to adjust the chain tension using the adjustment knob.
Demonstrates cleaning the guide bar with a brush.
Illustrates cleaning the drive sprocket area with a brush.
Shows cleaning the motor housing and cooling vents with a brush.
Demonstrates cleaning debris from under the chain cover.
Shows the process of turning the knob to adjust chain tension.
Illustrates fine-tuning chain tension using the adjustment dial.
Shows the correct chain tension, approximately 2-3 mm of sag.
Illustrates locking the chain tension adjustment knob.
Legal mentions and safety guidelines for product use.
Illustrates the initial steps of assembling the chainsaw parts.
Shows how to check or adjust the chain tension for proper operation.
Details the process of fitting the cutting chain onto the guide bar.
Explains how to attach and tighten the chain cover mechanism.
Illustrates fine-tuning the chain tension using a knob.
Demonstrates the correct method to check chain sag, aiming for 2-3 mm.
Shows how to lock the chain tension adjustment knob.
Compares correct (2-3 mm) and incorrect (>5mm) chain tension.
Lists essential safety gear for operating the chainsaw.
Illustrates how to attach the protective cover for the chain and bar.
Details the rotation of a knob to adjust chain tension.
Shows oil application and specifies a 40-minute lubrication interval.
Illustrates plugging the chainsaw into an electrical outlet.
Shows a final check of chain tension after assembly, with a 'CLIC!' sound.
Demonstrates a standard cutting method for logs.
Shows how to perform an angled cut at approximately 45 degrees.
Illustrates cutting smaller logs with specific depth measurements.
Shows how to support logs safely during cutting operations.
Compares two methods of positioning logs for cutting.
Illustrates activating and deactivating the chainsaw using red and green indicators.
Demonstrates a typical cutting posture and method.
Shows applying oil and a 40-minute interval reminder.
Illustrates a specific cutting posture for logs.
Shows the final stage of cutting through a log.
Shows how to check the chain and lists replacement part numbers like 91PX057X.
Illustrates connecting the chainsaw to power before performing maintenance.
Shows how to adjust the chain tension using the adjustment knob.
Demonstrates cleaning the guide bar with a brush.
Illustrates cleaning the drive sprocket area with a brush.
Shows cleaning the motor housing and cooling vents with a brush.
Demonstrates cleaning debris from under the chain cover.
Shows the process of turning the knob to adjust chain tension.
Illustrates fine-tuning chain tension using the adjustment dial.
Shows the correct chain tension, approximately 2-3 mm of sag.
Illustrates locking the chain tension adjustment knob.
General
