STERWINS EHT2-50.31 - Safety Instructions; General Safety Warnings; Work Area Safety; Electrical Safety

WARNING Read all safety warnings, instructions,
illustrations and specications provided with this power
tool. Failure to follow all instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
2. SAFETY INSTRUCTIONS
0
3
1.Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
2.Do not operate power tools in explosive atmospheres, such as
in the presence of ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3.Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
1.Power tool plugs must match the outlet. Power too plugs
must connect to a power outlet specied on the label. Never
modify the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
2.Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
3.Do not expose power tools to rain or wet conditions. Water
Work area safety
General Power Tool Safety Warnings
Electrical safety
210
EN