EasyManua.ls Logo

STERWINS EHT2-50.31 - Additional Hedge Trimmer Safety

STERWINS EHT2-50.31
233 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When clearing jammed material or servicing the unit,
make sure all power switches are o and the power cord
is disconnected.
Unexpected actuation of the hedge trimmer while
clearing jammed material or servicing may result in serious personal
injury.
Hold the hedge trimmer by insulated gripping surfaces
only, because the blade may contact hidden wiring or its
own cord.
Blades contacting a «live» wire may make exposed metal
parts of the hedge trimmer «live» and could give the operator an electric
shock.
Keep all power cords and cables away from cutting area.
Power cords or cables may be hidden in hedges or bushes and can be
accidentally cut by the blade.
Do not use the hedge trimmer in bad weather conditions,
especially when there is a risk of lightning.
This decreases the
risk of being struck by lightning.
2. SAFETY INSTRUCTIONS
1. Hold the hedge trimmer on graping surface of handles only,
holding of other parts may cause personal injury.
2. Wear the hearing protection.
3. Keep hands and feet away from the cutting device at all times and
especially when switching the product on.
4. Do not try to grasp or remove trimmings when the product is
running. Only remove trimmings when the product is switched o
and disconnected from the power supply.
5. Never hold the product by the guard.
Additional hedge trimmer safety warnings
214
EN

Related product manuals