STERWINS EHT2-60.4 - Residual Risks; Technical Data

182
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
IF THE PRODUCT IS DROPPED, SUFFERS HEAVY IMPACT OR
BEGINS TO VIBRATE ABNORMALLY, IMMEDIATELY STOP THE
PRODUCT AND INSPECT FOR DAMAGE OR IDENTIFY THE CAUSE
OF THE VIBRATION. ANY DAMAGE SHOULD BE PROPERLY
REPAIRED OR REPLACE BY AN AUTHORIZED SERVICE CENTRE.
• TO REDUCE THE RISK OF INJURY ASSOCIATED WITH CONTACTING ROTATING
PARTS, ALWAYS STOP THE MACHINE, DISCONNECT THE POWER PLUG, AND
MAKE SURE ALL MOVING PARTS HAVE STOPPED:
- BEFORE CLEANING OR CLEARING A BLOCKAGE
- WHEN LEAVING THE PRODUCT UNATTENDED
- BEFORE INSTALLING OR REMOVING ATTACHMENTS
- BEFORE CHECKING, MAINTAINING OR WORKING ON THE PRODUCT
2.11 RESIDUAL RISKS
• FAMILIARISE YOURSELF WITH THE USE OF THIS PRODUCT BY MEANS OF
THIS INSTRUCTION MANUAL. MEMORISE THE SAFETY DIRECTIONS AND
FOLLOW THEM TO THE LETTER. THIS WILL HELP TO PREVENT RISKS AND
HAZARDS. ALWAYS BE ALERT WHEN USING THIS PRODUCT, SO THAT YOU CAN
RECOGNISE AND HANDLE RISKS EARLY. FAST INTERVENTION CAN PREVENT
SERIOUS INJURY AND DAMAGE TO PROPERTY. SWITCH OFF AND DISCONNECT
FROM THE POWER SOURCE IF THERE ARE MALFUNCTIONS.
• EVEN IF ALL INSTRUCTIONS ARE STRICTLY FOLLOWED, THERE ARE STILL
SOME FACTORS THAT COULD LEAD TO HAZARDS, SUCH AS :
- THROWN OUT PIECES OF THE WORK PIECE.
- VIBRATION INJURIES : USE DESIGNATED HANDLES AND TRY TO REDUCE
WORKING TIME AND EXPOSURE.
- INJURIES CAUSED BY NOISE : WEAR EAR PROTECTION AND REDUCE
WORKING TIME AND EXPOSURE.
- INHALATION OF DUST AND PARTICLES.
- WEAR EYE PROTECTION AT ALL TIMES.
IF YOU EXPERIENCE ANY OF THESE FACTORS WHILE USING THE MACHINE,
STOP THE MACHINE CONSULT YOUR DOCTOR IMMEDIATELY
• INJURIES MAY BE CAUSED OR AGGRAVATED BY PROLONGED USE OF A
TOOL. WHEN USING ANY TOOL FOR PROLONGED PERIODS, ENSURE YOU TAKE
REGULAR BREAKS.
• PROLONGED USE OF THE PRODUCT EXPOSES THE USER TO VIBRATIONS
THAT CAN CAUSE A RANGE OF CONDITIONS COLLECTIVELY KNOWN AS HAND-
ARM VIBRATION SYNDROME (HAVS) E.G. FINGERS GOING WHITE; AS WELL AS
SPECIFIC DISEASES SUCH AS CARPAL TUNNEL SYNDROME.
• TO REDUCE THIS RISK WHEN USING THE PRODUCT, ALWAYS WEAR
PROTECTIVE GLOVES AND KEEP YOUR HANDS WARM.
2.12 TECHNICAL DATA
Model EHT2-60.4
Rated voltage (V) 220-240V~50Hz
Rated power (w) 650W
Max cutting capacity 27 mm
Blade length 60cm
Tooth distance 35mm
Net weight (without packaging) 3.9kg
Measured sound pressure level LpA: 83,4dB (A) KPA: 3,0dB (A)
Measured sound power level LWA: 96,8dB (A) KWA: 2,61dB (A)
Vibration level (K=1.5m/s
2
) 4,976 m/s
2
No-load speed (min
-1
) 1700