STERWINS EHT2-60.4 - First Use; Operation & Cutting Tips

184
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
NOTE: Always attach the blade cover when the product is not in use, for storage and
transportation.
WARNING ! READ THE « SAFETY INSTRUCTION » SECTION AT THE
BEGINNING OF THIS MANUAL INCLUDING ALL TEXT UNDER
SUBHEADING THEREIN BEFORE USING THIS PRODUCT.
Safety equipment and protective clothing : illustration
3.5
Make absolutely sure to wear the appropriate close-fitting protective clothing such as protective
pants, gloves and safety shoes. Wear a safety helmet with integrated hearing protection and a
face guard. Do secure long hair so that it is above shoulder level.
Use the following safety clothing and protective equipment when operating the product:
- Hearing protectors
- Head protection (Helmet)
- Gloves with approved saw protection
- Protective overall
- Safety glasses
- Safety shoes
- First aid kit in case of injury.
3.4 FIRST USE
WARNING ! READ THE « SAFETY INSTRUCTION » SECTION AT THE
BEGINNING OF THIS MANUAL INCLUDING ALL TEXT UNDER
SUBHEADING THEREIN BEFORE USING THIS PRODUCT.
Pay particular attention using the machine for the first time : focus and dedicate all your
attention to this first use. Make the first trial on a free space with no obstacle and no surrounding
element.
3.5 OPERATION & CUTTING TIPS
WARNING : DO NOT INSERT OR DISCONNECT THE POWER PLUG
WHILE THE TRIGGER IS PRESSED OR WHILE THE POWER TOOL IS
IN MOTION.
CAUTION ! ALWAYS WEAR SAFETY GLASSES. WEAR A FILTER
MASK IF THE OPERATION IS DUSTY. USE OF PROPER GLOVES AND
SUBSTANTIAL FOOTWEAR IS ALSO RECOMMENDED.
Connecting to the mains: illustration
4.1
Fix the power line to the handle hook and connect plug to the mains.
Switching on/o : illustration
4.2
Hold the product with one hand at the rear handle and with the other at the front handle.