2. SAFETY INSTRUCTIONS
Operation
c) Operate the machine in a recommended position and only on a rm,
level surface.
d) Do not operate the machine on a paved or gravel surface where ejected
material could cause injury.
e) Before using, always visually inspect to see, that the shredding means,
shredding means bolts and other fasteners are secure, the housing is
undamaged and that guards and screens are in place. Replace worn
ordamaged components in sets to preserve balance. Replace damaged
or unreadable labels.
f) Before use check the supply and extension cord for signs of damage
or aging. If the cord becomes damaged during use, disconnect the
cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the machine if the cord is
damaged or worn.
g) Never operate the machine while people, especially children, or pets
are nearby.
a) Before starting the machine, make certain that the feeding chamber is
empty.
b) Keep your face and body away from the feed intake opening.
c) Do not allow hands or any other part of the body or clothing inside the
feeding chamber, discharge chute, or near any moving part.
d) Keep proper balance and footing at all times. Do not overreach. Never
stand at a higher level than the base of the machine when feeding
material into it.
e) Always stand clear of the discharge zone when operating this machine.
f) When feeding material into the machine be extremely careful that
pieces of metal, rocks, bottles, cans or other foreign objects are not
186
EN
To Next Page
Loading...
