STERWINS ETHT2-50.3 - Page 222

4.TECHNICAL SPECIFICATIONS
Model ETHT2-50.3
Rated voltage, frequency 220-240V~50HZ
Rated input power 500W
Rated no-load speed 3300/min
Max. cutting length 384mm
Blade gap 22mm
Protection class Class II
Angle adjustment of blade head -90°/-60° / -30° / 0° / 30° / 60°
Weight approx 4.2 kg
Sound pressure level LpA 90.30dB(A)
Uncertainty KpA 2.5 dB(A)
Measured sound power level LWA 98dB(A)
Uncertainty K 1.5m/s
2
Guaranteed sound power level LWA 100dB(A)
Front handle (gripping surface) a
h
1.692m/s
2
Rear handlea
h
1.5m/s
2
Uncertainty K 1.5m/s
2
The sound values have been determined according to noise test code given in EN ISO 10517,
using the basic standards EN ISO 11094 and EN ISO 3744.
The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures
is necessary.
The declared vibration value has been measured in accordance with a standard test method
(according to EN 60745) and may be used for comparing one product with another. The
declared vibration value may also be used in a preliminary assessment of exposure.
WARNING!The vibration emission value during actual use of the tool can dier
from the declared value depending on the ways in which the tool is used. Identify
safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle
such as the times when the tool is switched o and when it is running idle in addition to
the trigger time). Depending on the actual use of the product the vibration values can
dier from the declared total! Adopt proper measures to protect yourself against vibration
exposures! Take the whole work process including times the product is running under no
load or switched o into consideration! Proper measures include among others regular
maintenance and care of the product and application tools, keeping hands warm, periodical
breaks and proper planning of work processes!
222
EN