113
2.4 HYDRAULIC POOL CLEANER SAFETY WARNINGS
• Make sure that the suction equipment installed in your pool and to which you connect
the hydraulic robot complies with current safety standards.
• Do not obstruct the pool's suction nozzles, the robot suction mouth, or the cleaner
hoses with any part of your body.
• Keep your hair, loose clothing, jewelery, etc. away from the suction nozzles.
• Regarding vinyl-lined swimming pools: before installing your new robot cleaner,
carefully inspect your pool lining. If the liner crumbles in places, or if you notice gravel,
folds, roots or corrosion due to metal on the underside of the liner, or if you notice that
the underlying surface (bottom and walls) is damaged, do not install the robot until
you have had the necessary repairs or replacement of the liner done by a qualied
professional.
2.5 SERVICE
• Have your product serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the product is maintained.
• Have the product checked by a qualied professional and repaired, if necessary, before
you operate it again.
3. TECHNICAL DATA
Model HSWC.2
Hose length 80cm
Total hose length 9m60
Hose diameter 38mm
Maximum dirt filtering capacity 10mm
Max length of pool 8m
Min depth of pool 1m
Max depth of pool 4m
Max surface of pool 32m
2
Max volume of pool 128m
3
Max chlorine quantity 5ppm
Allowed Water pH level 7-8
Pump power (minimum required) 250W
Pump power (optimum performance) 375W
Maximum pump power 750W
Robot movement speed 180 m/h
Pack dimensions 83cm X 43.5cm X 16.5cm
Machine dimensions 45cm X 45cm X 34cm
To Next Page
Loading...