STERWINS UP20 - Fatal Circumstances: Critical Issues; 8. End of Life

212
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Problems Probable causes Solutions Qualification
Product suddenly
stops
Battery pack discharged
Charge the battery
according to the
instructions included
with your machine
-
Battery too hot
Turn o the machine
and let it cool down
Unsatisfactory
cutting
performance
chain or Guide bar is
worn / damaged
Replace the chaine
or the guide bar
with a new one
- Chain is rusted
Turn o the motor
then clean the Chain
or replace it
thickness of branches
exceeds capacity
only cut branches
complying with
the capacity
7.6 FATAL CIRCUMSTANCES : CRITICAL ISSUES
Problems Solutions
The machine smokes
during operation
Immediately stop the machine, then
speak to service center
8. END OF LIFE
Electrical products should not be discarded with household products. Used electrical
products must be collected separately and disposed of at collection points provided for
this purpose. Talk with your local authorities or dealer for advice on recycling.