stex 8020RL - User Manual

Identifies main assembly components of the STEX Recumbent Bike.

Details components visible from the right side of the bike.

Details components visible from the left side of the bike.

Illustrates components specific to the 8020RL model with LCD attachable.

Illustrates components specific to the 8020RX model with LCD built-in.

Lists parts and details for the crank shaft assembly.

Details parts for the driven and idle pulley system.

Lists parts and details for the alternator assembly.

Lists parts for the power board assembly.

Details the assembly process for the recumbent saddle.

Lists parts for the display console assembly.

Lists parts for the LCD monitor support assembly.

Crucial safety guidelines before using the exercise bike.

Lists all parts and tools needed for assembly.

Detailed step-by-step assembly for the 8020R model.

Detailed step-by-step assembly for the 8020RL model.

Detailed step-by-step assembly for the 8020RX model.

Diagnosing issues when display console LEDs are not lit.

Troubleshooting the LCD TV for the 8020RL model.

Troubleshooting LCDs for the 8020RX display console.

Addressing issues with excessive resistance loading during use.

Troubleshooting when no resistance loading occurs.

Diagnosing lack of heart rate response from handlebars.

Troubleshooting POLAR heart rate sensor response.

Guide for adjusting and tensioning drive belts.

Instructions for replacing drive belts on the bike.

Steps for replacing the bicycle's alternator.

How to adjust the seat to prevent swaying.

Steps to access the control panel interface.

Overview of the control panel's menu structure.

Details on Odometer, Time, Default settings, SCI, Contrast, and Beep.

How to perform display and key tests.

Steps to access the channel management menu.

Overview of the channel management options.

Select input source and scan TV channels.

Adjust channel frequency, display messages, and set TV system.

Displays software versions and equipment name.