www.stiebel-eltron.com DEL SL electronic LCD | 29
INSTALLATION
Installation
10. Installation
10.1 Standard installation
- Electrical connection in the lower section of the appliance for
installation on unfinished walls
- Water connection for installation on unfinished walls
- For the appliance with adjustable connected load, the middle
load is preset.
For further installation options, see chapter "Installation options".
elect roni c comfor
t
D0000040738
Open the appliance.
26�02�02�1101
Remove the back panel by pressing the two locking hooks
and pulling the lower part of the back panel forwards.
D0000059694
Use the installation template to mark out the holes for drill-
ing. If the appliance is to be installed with water connections
for finished walls, also mark out the fixing hole in the lower
part of the template.
Drill the holes and secure the wall mounting bracket with
2screws and 2rawl plugs (screws and rawl plugs are not
part of the standard delivery).
Note
If you are installing the appliance with flexible water
connections, also secure the back panel with a screw.
Fit the wall mounting bracket.
30
1
26�02�02�0824�
1 Installation aid
Prepare the power cable.
Making the water connection
!
Material losses
Carry out all water connection and installation work in
accordance with regulations.
12
D0000053319
Seal and insert the twin connectors.
26�02�02�0799
2
3
1
3
1 Cold water with 3-way ball shut-off valve
2 DHW with tee
3 Gasket
Fit the water connections.
26�02�02�0856
Fit the strainer provided in the 3-way ball shut-off valve
!
Damage to the appliance and environment
The strainer must be fitted for the appliance to function.
When replacing the appliance, check that the strain-
er is present.
To Next Page
Loading...
