STIEBEL ELTRON LWZ 170 E plus - Parameter Change; Discarding a Parameter Change; Confirm Parameter Value

18 | LWZ 170 E PLUS / LWZ 370 PLUS WWW.STIEBEL-ELTRON.COM
INSTALLATION
Settings
Parameter change
 Press menu.
26�04�15�0067
 The parameter value starts to flash.
 Use plus or minus to change the parameter value.
26�04�15�0068
Discarding a parameter change
 If you do not want to save the changed parameter value,
press R.
26�04�15�0069
Confirm parameter value
26�04�15�0070
 If you want to save the changed parameter value, press
menu.
Note
To change other parameters, repeat the steps described
from "Selecting parameters". If you do not want to change
any more parameters, press R to return to standard mode.