OPERATION
Maintenance, cleaning and care
8 | LWZ 170 E PLUS / LWZ 370 PLUS WWW.STIEBEL-ELTRON.COM
26�04�15�0039
Extract the supply air and extract air filters. Make a note of
how the filters were fitted.
26�04�15�0015
Clean the filters, e.g. with a vacuum cleaner.
26�04�15�0040
Push the cleaned or new filter into the appliance.
26�04�15�0041
Close the filter door.
> 5 s
26�04�15�0016
Switch on the appliance by pressing the minusbutton for 5
seconds.
5s
1
2 3
26�04�15�0059
After cleaning or replacing the filters, hold down the R key
for 5 seconds to reset the filter display.
To confirm that the filters have been reset, the text "FILTER" will
flash briefly. Even if the message "FILTER" has not yet been dis-
played, it is possible to reset the filter. The counter is then reset
to zero.
Once the filter has been reset, the text "FILTER" disappears and
standard mode is displayed again.
To Next Page
Loading...
