STIEBEL ELTRON LWZ 304 SOL - Page 20

OPERATION
Operation
20 | LWZ 304-404 SOL www.stiebel-eltron.com
ACTUAL VALUES
OUTSIDE TEMPERATURE
ROOM TEMPERATURE HC1
SET ROOM TEMPERATURE HC1
RELATIVE HUMIDITY 1
ROOM TEMPERATURE HC2
SET ROOM TEMPERATURE HC2
RELATIVE HUMIDITY 2
HEAT M BOOST DHW TTL
HEAT M RECOVERY DAY
HEAT M RECOVERY TTL
BACK
HEATING CURVE HC1
HEATING CURVE HC2
BACK
GRADIENT
LOW END
ROOM INFLUENCE
MAX. SET VALUE
MIN. SET VALUE
HEATING CURVE
BACK
HEATING
FLOW PROPORTION
As per heating curve HC1,
but without parameter
"Flow proportion"
HTG FACTORY SETTINGS
HYSTERESES
Code required
Code required
296066-38500-9030_LWZ_304-404_SOL_Bedienung_en.indb 20 21.07.2015 12:03:54