STIEBEL ELTRON WPF 10 Operating And Installation Instructions

45
12. System periphery:
Circulation pump source
Manufacture / type /
Circulation pump heating
Manufacture / type /
Circulation pump
Heat pump/heat exchanger
Manufacture / type /
Circulation pump
Heat exchanger / cylinder
Manufacture / type /
Circulation pump heat pump/
buffer cylinder
Manufacture / type /
Circulation pump DHW
circulation
Manufacture / type /
Circulation pump heat pump/
DHW cylinder
Manufacture / type /
Mixing valve
Manufacture / type /
Mixing valve servomotor
Manufacture / type /
13. Control unit
STIEBEL-ELTRON product/type
Third party: type
Parameters set in acc. with the control unit commissioning report
14. Power supply:
Cable type:
No. of conductors
Cross-section
Installed acc. to VDE yes no
Control cable heat pump:
Cable type
No. of conductors
Cross-section:
10. Heat source:
Air Outside air
Extract air
Temperature min: °C
max: °C
Ground
Ground probe
No.
Internal pipe diameter:
Distributor: yes no
Depth of hole:
Hydraulic connections as per Tichelmann
yes no
Ground collector
Pipe length:
Diameter:
Area:
Distributor: yes no
Hydraulic connections as per Tichelmann
yes no
Process medium:
Type:
Concentration:
Frost protection:
Water Well
Surface water
Others:
11. Heating system:
Underfloor heating
Convectors
Panels
Radiators
Design temperature: FL
°C/ RE °C

STIEBEL ELTRON WPF 10 Specifications

General

Brand	STIEBEL ELTRON
Model	WPF 10
Category	Heat Pump
Language	English