CheCklist
7
ENGLISH
Has the dual mode temperature for DHW been set?
WPM controller: Chapter "SET-
TINGS" (DHW/ EXTERNAL HEAT
SOURCE and ELECTRIC REHEAT-
ING)
If cooling is to be provided: Has the COOLING parameter been set
to "ON" and have the settings been made in accordance with the
WPM installation instructions?
WPM controller: Chapter “SET-
TINGS” (COOLING)
A video is available on the internet showing a heat pump being installed. To watch it, scan the QR code or paste this
link into your browser: www.stiebel-eltron.de/install-wpl25.
To Next Page
Loading...
