Stiga 13-6104-21 User Manual

Edition Manual Chapter Page
2014-03-31 Workshop Manual, GGP Park 5 Belts 3
Case Commercial
grade belts
Original spare
parts belts
Remarks
Floating pulley at
the implement.
Designed to
transmit power
between aligned,
paralell and fixed
pulleys.
The original PTO
belt is designed to
operate, even if the
pulleys are moving
up and down and
are tilting at the
same time
The implement follows
the ground which
involves that its pulley
is constant moving.
To resist the excessive
operating conditions,
the original belts are
made of fibre
reinforced rubber.
Bending in two
directions
Designed to bend
around pulleys in
one direction only
Most of the belts at
the machine have
tension rollers,
actuating from the
outside of the belt.
This means the the
belt has to bend
both inwards and
outwards during the
operation.
All original belts which
operate with tension
rollers actuating from
the outside have
reinforcements. The
reinforcement is
special designed for
the actual case.
Noise Manufactured
without any
special respect to
the actual case.
The original belts
are carefully
selected to give the
lowest noise
increment to the
machine during
operation.
Depending on the
function of the belt, any
of the following belt
types are itemised:
• Wrapped
• Non-friction
• Raw-edge

Stiga 13-6104-21 Specifications

General

Brand	Stiga
Model	13-6104-21
Category	Lawn Mower
Language	English