Stiga Estate 384 User Manual

171506141/2A 11/2018
MP 84 Series
MP 98 Series
SD 98 Series
SD 108 Series
IT
Tosaerba con conducente a bordo seduto - MANUALE DI ISTRUZIONI
ATTENZIONE: prima di usare la macchina, leggere attentamente il presente libretto.
DE
Aufsitzmäher (Rasenmäher mit Fahrersitz mit sitzendem Benutzer)
GEBRAUCHSANWEISUNG
ACHTUNG: vor inbetriebnahme des Geräts die Gebrauchsanleitung aufmerksam lesen.
EN
Ride-on lawnmower with seated operator - OPERATOR’S MANUAL
WARNING: read thoroughly the instruction booklet before using the machine.
FR
Tondeuse à gazon à conducteur assis - MANUEL D’UTILISATION
ATTENTION: lire attentivement le manuel avant d’utiliser cette machine.
NL
Grasmaaier met zittende bediener - GEBRUIKERSHANDLEIDING
LET OP: vooraleer de machine te gebruiken, dient men deze handleiding aandachtig te lezen.

Stiga Estate 384 Specifications

General

Cutting Width	84 cm
Cutting Height Range	25-80 mm
Transmission	Mechanical
Number of Gears	5 forward + 1 reverse
Engine Power	5.8 kW
Fuel Tank Capacity	6 L
Transmission Method	Lever
Cutting Method	Collecting, Rear Discharge
Wheel Size	15"-18"
Engine Type	4-stroke

Summary

Safety Precautions

Training

Emphasizes familiarizing oneself with controls and proper use to prevent accidents and injuries.

During Use

Provides guidance on safe operation, including workspace conditions, fuel handling, and environmental awareness.

Usage Restrictions

Assembly

Assembly of Components

Battery Assembly and Connection

Control Commands

Ignition Switch with Key

Throttle Control

Drive Pedal

Describes the pedal used to control forward/reverse speed and the hydrostatic transmission.

Switching Cutting Tools On and Off

Explains how to engage and disengage the cutting deck using the electromagnetic clutch.

Using the Machine

Preparatory Work Steps

Lists essential pre-operation checks and procedures for safe and effective use.

Mowing Grass

Provides a guide on how to operate the machine for effective and optimal grass mowing.

Safety Checks

General Safety Check

Outlines a series of checks to perform before using the machine to ensure it is safe to operate.

Checking Safety Devices

Details how to verify the correct functioning of the machine's safety systems.

Starting Up

Routine Maintenance

Refueling Fuel / Emptying Fuel Tank

Cleaning

Troubleshooting

Problem: Engine does not start

Problem: Engine stops during work

Problem: Cutter tools do not engage or stop slowly