Need help?Do you have a question about the Stiga PARK 4WD PRO 25 and is the answer not in the manual?
General| Drive Type | 4WD |
|---|---|
| Transmission | Hydrostatic |
| Fuel | Petrol |
| Mulching Function | Yes |
| Cutting Height | 25 - 90 mm |
Symbols used on the machine to indicate required care and attention during use and maintenance.
Explanation of how figures and headings are numbered and referenced within the manual.
Details the 4-wheel drive system, hydraulic power transfer, and differential axles.
Explains the articulated steering mechanism for a small turning radius.
Describes the electrical safety system that interrupts dangerous activities.
Introduces the various controls for operating the machine and its functions.
Covers clutch-parking brake, inhibitor, driving brake, steering wheel, throttle, choke, and ignition lock.
Covers power take-off, hour meter, cruise control, cutting height, rear rake, sand spreader, clutch release, seat, and engine casing.
Lists tasks like mowing, sweeping, snow clearance, and their corresponding accessories.
Instructions and safety precautions for filling the fuel tank with lead-free petrol.
Procedure for checking the engine oil level before operation, with model-specific notes.
Essential safety checks to perform before each use, including general and electrical system checks.
Step-by-step guide for starting the engine, including choke usage and throttle setting.
Explanation of power assisted steering and its effect at different engine speeds.
Advice on operating the machine, particularly regarding oil levels and slope operation.
Instructions for safely stopping the engine and securing the machine.
Guidelines for cleaning the machine after use, focusing on safety and component care.
Overview of STIGA's service programme for maintaining reliability and operational safety.
Steps to take before performing maintenance, ensuring safety and machine stability.
Recommended tyre pressures for the front and rear wheels.
Specifies intervals for changing engine oil and replacing the oil filter based on operation hours and calendar months.
Details recommended engine oil grades and quantities for different STIGA models.
Instructions for replacing the engine oil filter, with specific steps for Pro 25 models.
Guidance on replacing the fuel filter for different models and checking for leaks.
Procedures for checking, draining, and refilling transmission oil and replacing the hydraulic filter.
Steps to clean the tank filter assembly.
Instructions for filling the transmission oil reservoir and ensuring proper levels.
Covers checks for belt integrity and steering system clearance/adjustment.
Information on battery care, charging using engine or charger, and safety.
Steps for battery removal, installation, and cleaning of terminals.
Procedures for cleaning and replacing air filters for different engine models.
Covers spark plug replacement intervals and cleaning the engine air intake.
Table detailing lubrication points, actions, and frequency for wheel bearings, steering chains, and control cables.
Guidance on identifying and replacing fuses for various electrical functions.
To Next Page
