Stiga TRE 0702 - Page 19

Release 00 - 03/2018
Engine TRE 0701-TRE 0702-TRE 0801
pag. 19
Service manual
6. STARTING SYSTEM
4 - Using a suitable extracting tool, remove the
ywheel (8) as indicated in the diagram.
Ensure that the engine shaft key is retained.
5 - Remove the screws (9) and lift out the starting
motor (10).
6 - Loosen the screws (11) and remove the lower
part of the starting motor.
7 - Unscrew the two screws (12) which secure the
brushes (13) inside the lower cover of the starting
motor. Remove the springs (14).
9
9
10
11
11
13
13
12
12
8
INDEX
<< BACK >>