Stiga TRE 0702 - Page 29

Release 00 - 03/2018
Engine TRE 0701-TRE 0702-TRE 0801
pag. 29
Service manual
5 - Remove the three screws (29) which fasten the
levers support (28) of the engine.
6 - Perform the above operations in reverse order
when assembling.
7 - Adjust the maximum speed [ 8.4].
Tightening torques
24 Support air level screw 8-12 Nm
26 Support screws petrol pump 8-12 Nm
29 Support level screws 8-12 Nm
Technical information
Maximum speed (FAST) 2950 r.p.m.
Special equipment
13 Speed indicator
8. GOVERNOR SYSTEM OF THE CARBURETTOR
29
29
29
28
INDEX
<< BACK >>