10
English / USA
BG-KM
Recommended working technique to
minimize noise:
: Operate your power tool only at
reasonable times of the day – not
early in the morning, late at night or
during lunchtime rest periods.
Observe times recommended by
local authorities.
: Operate your blower at the lowest
possible engine speed needed to
perform the task.
: Inspect the unit before starting work
– particularly the muffler, air intakes
and air filter.
Use only KombiEngines supplied by
STIHL or expressly approved by STIHL
for use with your specific model.
The KombiTools may be operated in
combination with the following
KombiEngines:
STIHL KM 55 R, KM 85 R, KM 90 R,
KM 110 R, KM 130 R
The KombiTool may also be mounted to
STIHL brushcutters with a split boom
(T models).
Operation of this KombiTool is therefore
also permitted on the following power
tool models:
STIHL FS 55 RT, FS 83 RT, FS 85 RT
: Push the nozzle onto the blower
tube as far as the lug and turn it
clockwise to lock in position.
To reduce the risk of injury, operate
the blower only with a properly
mounted blower tube.
Approved KombiEngines Assembling the Blower
BA_SE_213_002_01_01.fm Seite 10 Freitag, 4. Januar 2008 12:03 12
To Next Page
Loading...
