Stihl Cutquik TS 460 - CLUTCH; Clutch Disassembly

STIHL TS 460 20
4. CLUTCH
4.1 Removing and Disassembly
Top:
Socket 5910 893 5616
Bottom:
Clutch
Top:
Removing the cover washer
Bottom:
Assembly pin 5910 890
Top:
Removing a clutch spring
Bottom:
Component parts of clutch
Troubleshooting charts, see 2.1.
- Remove the V-belt, see 3.4.
- Unscrew clutch from
crankshaft stub using socket.
Caution! Clutch has a
left-hand thread.
- Remove cover washer
from crankshaft stub.
- Use assembly hook to remove
all the clutch springs.
- Pull the clutch shoes off
the carrier.
- Pull the retainers off the
clutch shoes.
- Clean all parts and stub of
crankshaft in white spirit.
Replace any damaged or
worn parts.