STIHL TS 460 6
1.6 Tightening Torques
Fastener Thread For component Torque Remarks
size Nm Nm
Spline screw IS-M5x58x22 Cylinder/crankcase 10.0
Spline screw IS-M5x35x22 Crankcase/engine housing 10.0
Spline screw IS-M5x20 Spacer flange 7.0
Clutch 50.0
Spline screw IS-M5x20 Cast arm/engine housing 7.0
Hexagon nut M10X1 Starter cup 40.0
Collar nut M8x1 Flywheel 25.0
Spline screw IS-M5x14 Filter base/engine housing 7.0
Spline screw IS-M5x58x35 Connector/carburetor/flange 5.0
Spline screw IS-M5x14 Housing cover/engine housing 7.0 1)
Spline screw IS-M5x20 Ignition module 8.0 1)
Spline screw IS-M5x20 Fan cover 6.0
Spline screw IS-M5x14 Muffler/cylinder 10.0
Spline screw IS-M5x35 Muffler/engine housing 10.0 1)
Spline screw IS-M4x6 Deflector baffle/muffler 3.0
Spline screw IS-M5x14 Clamp 4.0
Spline screw IS-M4x6 Short circuit wire/ground 3.0
Spline screw IS-DG5x24 Handle molding/handle 3.0
Spline screw IS-M5x14 Annular buffer/engine housing 7.0
Spline screw IS-DG5x24 AV-molding/handle 3.0
Spline screw IS-M5x14 Annular buffer/handle tube bracket 7.0
Spline screw IS-M5x14 Support/handle tube bracket 7.0
Spline screw IS-M5x14 Handle tube/handle tube bracket 7.0
Spline screw IS-DG5x24 Handle tube/handle 6.0
Spline screw IS-M5x20 Shroud/engine housing 6.0
Spline screw IS-M5x20 Carburetor box cover 6.0
Spline screw IS-M5x20 Starter cover 6.0
M14x1.25 Spark plug 27.5
1) Washer must be fitted under screw head.
To Next Page
Loading...
