FS 100 RX
English
35
4 Throttle Trigger
Controls the speed of the engine.
5 Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
6 Choke Knob
Eases engine starting by enriching
mixture.
7 Spark Plug Boot
Connects the spark plug with the
ignition lead.
8 Air Filter Cover
Covers and protects the air filter
element.
9 Fuel Tank
For fuel and oil mixture.
10 Machine Support
For resting machine on the ground.
11 Fuel Filler Cap
For closing the fuel tank.
12 Carburetor Adjusting Screws
For tuning the carburetor.
13 Fuel Pump
Provides additional fuel feed for a
cold start.
14 Starter Grip
The grip of the pull starter, for
starting the engine.
15 Muffler with Spark Arresting Screen
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator.
Spark arresting screen is designed
to reduce the risk of fire.
16 Mowing Head
The cutting attachment, i. e.
mowing head, for different
purposes.
17 Deflector for Mowing Heads
The deflector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the
operator by the cutting attachment
and from contact with the cutting
attachment.
18 Line Limiting Blade
Metal blade at the deflector which
keeps the line of the mowing head
at the proper length.
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Engine
Single cylinder four-stroke engine with
mixture lubrication
Specifications
A = 300 hours
B = 125 hours
C= 50hours
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
To Next Page
Loading...
Need help?
General
