FSA 65, FSA 85
English
22
N Hold the mowing head steady.
N Rotate the spool counterclockwise
until the shortest line is about 4 in
(10 cm) long.
N If necessary, cut the longer line to a
length of about 4 in (10 cm).
The mowing head is now full.
Mounting the Mowing Head
N Slip the mowing head (6) over the
shaft (7) and engage hex recess (8)
on the external hexagon (9).
N Turn the spool (2) clockwise until
the two arrow heads line up –
secure the spool in this position.
N Insert the cap (1) in the spool (2),
press it down as far as stop and turn
it clockwise at the same time.
N Turn the cap (1) as far as stop and
tighten it down by hand.
To Next Page
Loading...
