FSE 60, FSE 71, FSE 81
English
40
Mounting Depth Wheel on Support
N Push the depth wheel (1) into the
required position on the support (2)
until the locking hooks (3) engage.
Squeeze the locking hooks (3) together
to release the depth wheel (1) from the
support (2).
Fitting Depth Wheel on Deflector
N Push the depth wheel (1) with
support on to the deflector (4).
N Secure the depth wheel (1) on the
deflector's (4) hook (6) with the
locking tab (5).
The depth wheel (1) can be released
from the hook (6) and pulled off the
deflector (4) by raising the locking
tab (5) slightly.
N Loosen the screw (1).
N Rotate the loop handle (2) 180°.
N Tighten down the screw (1) firmly.
The trimmer can now be turned through
180° and used as a power edger (see
"Applications").
To Next Page
Loading...
