Stihl MH 700 - Filling the Oil Bath Air Filter; Refueling the Tiller; Refueling Procedures

0478-404-9604-A
60
English 6 Assembling the Cultivator
► Position holder (4) so the bores align.
► Install washers (5) and bolts (6).
► Place washers (7) on bolts (6).
► Screw on nuts (8) and tighten firmly.
► Insert bolts (9) through guard plate (10).
► Place washers (11) on bolts (9).
► Screw on nuts (12) and tighten firmly.
6.8.2 Attaching the Covers
► Hook cover (1) onto bracket (2).
► Connect light cable connectors (3 and 4).
► Push bracket (2) inwards so that cover (1) can be
attached.