0478-404-9604-A
65
English
9 Starting and Stopping the Tiller
► Move gear lever (1) to the desired position.
9.3 Adjusting the Engine Speed
The engine speed can be regulated using the throttle lever.
► Start the engine.
► Adjust the engine speed using throttle lever (1).
9.4 Engaging and Disengaging Self-propulsion
9.4.1 Engaging Self-propulsion
The clutch lever for self-propulsion is used to engage or
disengage the drive shaft when the engine is running.
Self-propulsion forwards
With the hoes or running wheels attached and gears 1 or 2
engaged, the tiller moves forwards when the clutch lever for
self-propulsion is actuated.
► Start the engine.
► Press lock (1) downwards to the stop and hold.
► Press clutch lever for self-propulsion (2) upwards to the
stop and hold.
► Release lock (1).
The drive is engaged and the drive shaft rotates. The tiller
moves forwards.
Self-propulsion rearwards
With the hoes or running wheels attached and gear 0/R
engaged, the tiller reverses when the clutch lever for reverse
gear is actuated followed by the clutch lever for self-
propulsion.
► Start the engine.
► Press lock (3) downwards to the stop and hold.
► Press clutch lever for reverse gear (4) upwards to the stop
and hold.
To Next Page
Loading...
