0478-404-9604-A
66
English
10 Checking the Cultivator
► Release lock (3).
► Engage self-propulsion using clutch lever for self-
propulsion (2).
The drive is engaged and the drive shaft rotates. The tiller
reverses.
9.4.2 Disengaging Self-propulsion
► Release clutch lever for self-propulsion (1).
The drive is disengaged and the drive shaft does not
rotate.
10.1 Checking the Controls
Lock
► Stop the engine.
► Try to press the clutch lever without pressing the lock.
► If the clutch lever can be pressed: do not use the tiller and
consult a STIHL specialist dealer.
The lock is defective.
► Press the lock and hold.
► Press the clutch lever.
► Release the clutch lever and lock.
► If the clutch lever or lock is stiff or does not spring back
into the initial position: do not use the tiller and consult a
STIHL specialist dealer.
The clutch lever or lock is defective.
► Check all clutch lever locks in the same way.
Clutch lever for self-propulsion
► Start the engine.
► Set gear 1 or 2.
► Engage self-propulsion.
The drive is engaged and the drive shaft rotates.
► If self-propulsion does not engage:
► Do not use the tiller and consult a STIHL specialist
dealer.
The clutch lever for self-propulsion is defective.
Clutch lever for reverse gear
► Start the engine.
► Set gear 0/R.
► Unlock the clutch lever for reverse gear, press upwards
and hold.
► Engage self-propulsion.
The drive is engaged and the drive shaft rotates.
► If the tiller does not reverse:
► Do not use the tiller and consult a STIHL specialist
dealer.
The clutch lever for reverse gear is defective.
Clutch lever for lateral adjustment
► Unlock the clutch lever for lateral adjustment, press
upwards and hold.
The handlebar can be adjusted laterally.
► If the handlebar cannot be adjusted:
► Do not use the tiller and consult a STIHL specialist
dealer.
The clutch lever for lateral adjustment or cable is
defective.
Main switch
► Start the engine.
10 Checking the Cultivator
To Next Page
Loading...
