RB 200
English
23
Definitions
1 Spray gun
Controls the high-pressure jet.
2 Coupling for high-pressure hose
To connect the high-pressure hose
to the spray gun.
3 Spray gun trigger
Opens and closes the valve in the
spray gun.
4 Trigger lockout
Blocks the Spray gun trigger.
5 Coupling for spray lance
To connect the spray lance to the
spray gun.
6 Spray lance
Directs the water from the spray gun
to the high-pressure nozzle
7 Coupling for high-pressure nozzle
To connect the high-pressure
nozzle to the spray lance.
8 High-pressure nozzle
Creates the form and intensity of the
high-pressure jet.
9 Pushbar
To push the pressure washer.
10 Holder for high-pressure nozzles
To store the high-pressure nozzles.
11 Star knob
To release and fold down the
pushbar.
12 On/Off Switch
To start/stop the engine.
13 Connector for water inlet with
screen
To connect the water hose to the
high-pressure pump. The screen
helps prevent dirt and debris from
entering the pump.
14 Connector for high-pressure hose
To connect the high-pressure hose
to the high-pressure pump.
15 Suction hose for detergent
To draw off detergent from a
separate container.
16 Coupling on high-pressure hose
To connect the high-pressure hose
to the spray gun and to the high-
pressure pump.
17 High-pressure hose
Transports the water from the high-
pressure pump to the spray gun.
18 Holder for high-pressure hose
To store the high-pressure hose.
19 Holder for spray attachment
To store the spray attachment.
Engine
See engine instruction manual for
additional specifications.
High-pressure pump
Water supply
Specifications
Manufacturer: Kohler
Model designation: 173 XT
Type: Single cylinder
four-stroke engine
Fuel: Gasoline
Rated / Permissible
Pressure: psi 2500
MPa 17
bar 170
Maximum water
throughput: gpm 2.3
l/min 8.7
l/h 520
Maximum suction height
from a tank: ft. 2
m0.6
Maximum kickback force N 26.9
Diameter of water hose: in. 3/4
Maximum length of water
hose: m 15.25
ft. 50
Minimum quantity: gpm 3.3
l/min 12.5
To Next Page
Loading...
