Stihl RB 400 - Connecting and Removing the High-Pressure Hose

RB 400
English
13
Suction hose for detergent
N Attach the suction hose for
detergent (1) to the low-pressure
connector (2) on the pump
Storing accessories
N Place the spray attachment in the
holder on the frame
N Hang the high-pressure hose on the
holder on the frame
N Insert the high-pressure nozzles in
the holders on the frame
WARNING
To reduce the risk of severe injury from
high pressure spray, always shut off the
pressure washer and relieve any
remaining pressure in the line by
squeezing the spray gun trigger before
attempting to remove the high-pressure
hose from either the pump or the spray
gun.
N Remove all sand and debris from
the connections
Connection to the high-pressure pump
Connecting
N Push the high-pressure hose into
the high pressure connector (1)
N Attach the union nut (2) and screw it
on and tighten by hand
Removing
N Unscrew union nut
N Pull the high-pressure hose off
pressure connector
Connection to the spray gun
Connecting
N Push the high-pressure hose into
the coupling on the spray gun (1)
N Attach the union nut (2) and screw it
on and tighten by hand
Removing
N Unscrew the union nut
N Pull the high-pressure hose off the
coupling on the spray gun
2
1
0000-GXX-0307-A0
0000-GXX-0311-A0
Connecting and Removing
the High-Pressure Hose
1
2
0000-GXX-0315-A0
1
2
0000-GXX-0318-A0