Stihl RLE 240 - Folding the Handlebar; Connecting the Lawn Scarifier to the Mains; Switching the Lawn Scarifier On and Off; Switching the Lawn Scarifier On

0478-670-9910-A
38
English 6 Assembling the Lawn Scarifier
6.1 Attaching the Handlebar
► Switch the lawn scarifier off and detach the extension
cable connector from the mains plug of the lawn scarifier.
► Place the lawn scarifier on a level surface.
► Push holder (8) onto bolts (7).
► Align upper handlebar (1) and centre handlebar
section (2) so that the bores align.
► Insert bolt (7) and align so that the bolt head is flush with
centre handlebar section (2) on both sides.
► Place washer (4) on bolt (7).
► Screw on wing nut (3).
► Align lower handlebar (10) and centre handlebar
section (2) so that the bores align.
► Insert bolt (7) and align so that the bolt head is flush with
centre handlebar section (2) on both sides.
► Place washer (4) on bolt (7).
► Screw on wing nut (3).
► Press cable (9) into holders (8).
The handlebar must not be dismantled again.
6.2 Removing the Combing Roller from the
Transport Compartment Before Use for the First
Time
► Switch the lawn scarifier off and detach the extension
cable connector from the mains plug of the lawn scarifier.
► Place the lawn scarifier on a level surface.
► Open quick-clamping devices (1) and fold down the
handlebar to the rear.
► Hold the lawn scarifier at the lower transport handle and
upend.
► Remove the cable ties.
► Remove the combing roller from the transport
compartment and keep it in a safe place.
6 Assembling the Lawn Scarifier
8 9
1
2
3
10
4
5
6
7
8
0000-GXX-B365-A00000-GXX-B365-A00000-GXX-B365-A0
2
1
0000-GXX-B366-A0
1
2
0000-GXX-B384-A0