0478-670-9910-A
39
English
7 Adjusting the Lawn Scarifier for the User
6.3 Assembling, Attaching and Detaching the Grass
Catcher Box
6.3.1 Assembling the Grass Catcher Box
► Pull fabric (1) over frame (2) so that the base plate is on
the bottom and handle (3) is on the outside of the fabric.
► Press plastic profiles (4) onto the frame.
The plastic profiles engage with a click.
6.3.2 Attaching the Grass Catcher Box
► Switch the lawn scarifier off and detach the extension
cable connector from the mains plug of the lawn scarifier.
► Open discharge flap (1) and hold it open.
► Take hold of grass catcher box (3) by handle (2) and
suspend shaft (5) in mount (4).
► Set down discharge flap (1) on grass catcher box (3).
6.3.3 Detaching the Grass Catcher Box
► Switch the lawn scarifier off and detach the extension
cable connector from the mains plug of the lawn scarifier.
► Place the lawn scarifier on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the handle.
► Close the discharge flap.
7.1 Folding Up and Adjusting the Handlebar
► Switch the lawn scarifier off and detach the extension
cable connector from the mains plug of the lawn scarifier.
► Place the lawn scarifier on a level surface.
► Fold up upper handlebar (1).
► Tighten wing nuts (2).
3
2
1
5
4
0000-GXX-B368-A0
7 Adjusting the Lawn Scarifier for the
User