Stihl TS 400 - Page 48

STIHL TS 400 48
• Remove that half of the housing. • Prise stoppers out of lower
rubber buffers.
• Press contact spring holder out of
slot.
- Remove holder.
• Unscrew the screws (1) of
handle (2).
• Unscrew the screws (3) on
support (4).
- Remove support.
• Remove that half of the housing.
• Force out impulse hose.
• Remove gasket. • Unscrew the screws in the
rubber buffers.
• Remove manifold.