110 TS 500i
: Push the fuel suction hose (1)
through the bushing (2) into the
fuel tank
: Press the connecting element (1)
into the bushing (2) so that the fin
(arrow) is between the two tabs
: Push the hose holder (1) of the
fuel hoses and injection pump (2)
into the guides (arrows)
– Install the handlebar, b 9.5
1307RA238 TG
1
2
1307RA239 TG
2
1
1307RA240 TG
2
1
: Pull the fuel suction hose (1) out
of the fuel tank with assembly
hook (2) 5910 893 8800
Take care not to overextend the fuel
hose.
– Fit the pickup body, b 11.8.1
– Close the filler cap
– Reassemble remaining parts in
reverse order
1
2
1307RA241 TG
To Next Page
Loading...
