Stihl TS 500i - Page 114

113TS 500i
No. Designation Part No. Use Re-
marks
27 Assembly hook 5910 890 2800 Detach springs from clutch shoes
28 Stud driver M8 - 7.5 5910 890 3000 Screw in studs for attaching the "cast
arm with guard"
29 Assembly stand 5910 890 3101 Mount machine for repair (support
5910 850 1650 mounted)
30 Wiring tool 5910 890 4000 Install electrical leads
31 Puller 5910 890 4400 Remove oil seals
- Jaws (No. 3.1) 0000 893 3706 Remove oil seal on clutch side
- Jaws (No. 6) 0000 893 3711 Remove oil seal on fan side
32 Puller 5910 890 4504 Removing flywheel
33 Stud puller, M8 5910 893 0501 Unscrew studs for attaching the "cast
arm with guard"
34 Screw sleeve 5910 893 2420 Installing the crankshaft
35 Socket, 13 mm, long reach 5910 893 2804 Remove and install decompression
valve
36 Bit DIN 3124, size 13 5910 893 5608 Unscrew flywheel nut
37 Socket, DIN 3124-S19 x12.5L 5910 893 5613 Removing and installing the clutch
38 Assembly hook 5910 893 8800 Remove pickup body
Remarks:
1) Use only for releasing.