38 TS 500i
5. Starter cup / clutch
5.1 Starter cup
– Remove the "cast arm with
guard", b 4.2
: Remove the screw (arrow)
– Screw remains in cap
: Remove the cap (1) with screw
: Remove the spark plug boot (1)
: Unscrew the spark plug (1)
1307RA050 TG
1
1
1307RA051 TG
1307RA052 TG
1
Decompression valve must be
relieved.
: Insert locking strip (1)
0000 893 5903 in the cylinder
Locking strip (1) 0000 893 5903
must rest against the cylinder wall
(arrow) – Position as shown.
: Unscrew nut (1) and pull off
starter cup (2)
– Examine the starter cup, replace
if necessary
1307RA053 TG
1
1307RA054 TG
1307RA055 TG
1
2
: Align the starter cup (1) so that
the hexagon (arrow) engages
hexagon (2) of the clutch
– Slide the starter cup into place
and screw on the nut
– Block the piston and screw the
nut tight
– Reassemble remaining parts in
reverse order
1307RA056 TG
1
2
To Next Page
Loading...
