Stihl TS 500i - Specifications

49TS 500i
: Unscrew the screw (1)
: Remove the ground wire (2) and
cover (3)
: Unscrew the screw (1) and
remove the cable holder (2)
: Pull the bushing (1) and
generator lead (2) from the
guides (arrows)
1307RA090 TG
1
3
2
1307RA091 TG
1
2
1
1307RA092 TG
2
: Pull bushing (1) with wiring
harness (2) of the sensors and
bushing (3) with wiring
harness (4) of the injection valve
from the guides (arrows)
: Unscrew the screw (1) and
remove the air guide shroud (2)
: Unscrew the screws (2) on the
bottom and remove long
screw (3)
: Remove the clamp (1)
1307RA093 TG
3
1
4
2
1307RA094 TG
1
2
1307RA337 TG
2
3
2
1
: For a pan head screw on the
bottom, guide the tool through
the hose (2) and unscrew the pan
head screw – the pan head screw
stays in the hose (2)
: Unscrew the other three pan
head screws (1)
: Carefully pull off the cylinder (1)
1307RA368 TG
1
1
2
1
1307RA100 TG
1