Stihl TS 500i - Page 73

72 TS 500i
: Unscrew the screw (1) and lift the
holder (2) and switch out of the
mount
: Pull the blue and black lead out of
the guides (arrows)
: Pull the plug connections (1)
and (2) out of the guides (arrows)
– Disconnect the plug connections
1307RA293 TG
2 1
1307RA294 TG1307RA295 TG
1
2
: Pull the wiring harness (1) of the
switch out of the opening (arrow)
: Remove the retainer (1)
: Check the switch (2), replace if
necessary
– Check the control panel, replace
if necessary, b 7.7
Installation
Use the wiring tool 5910 890 4000
to press the leads completely into
the guides, b 1.1.
1307RA296 TG
1
1307RA297 TG
1
2
: Press the switch (1) into the
holder (2) until it engages
: Push the wiring harness (1) of the
switch with the plug through the
opening (arrow)
: Connect the yellow leads (1) and
green leads (2) completely
1307RA298 TG
2
1
1307RA299 TG
1
1307RA300 TG
1
1
2
2