Operation 4
Picking up a load
DANGER
Danger of tilting to the side
If the forks of the industrial truck can be inserted
under a load outside of very narrow aisles, the
truck can also be used for stacking. Under no
circumstances must the truck be driven round
corners with a load raised further than just clear
of the ground. At greater heights, only positioning
movements at creep speed are permitted. Position
the steering straight ahead.
*Option
Actuate operating roc
ker switch to the right or
left for infinitely var
iable lifting or lowering of
the cab.
Additional lift
Before actuating the control rocker at (1) or
(2), press the auxiliary lift selection key (3).
Additional lift, load-side operation
(1) Raise the auxiliary lift.
(2) Lower the auxiliary lift.
(3) Second manual button for (1) and (2)
(4) is not assigned, reserved for options
These industrial trucks can optionally be
equipped with load-side operation for the
auxiliary lift.
521
2 804 3001 EN - 02/2017 67
To Next Page
Loading...
Need help?
General
