4 Operation
Picking up a load
1 Infinitely adjustable lowering. Simultane-
ously touch the steering knob or steering
wheel.
2 Infinitely adjustable lifting. Simultaneously
touch the steering knob or steering wheel.
Load pick-up with automatic guid-
ance
Order pickers are mainly intended for col-
lecting or distributing goods in a container or
on a pallet. It is not possible to place loads
into stock or remove loads from stock in very
narrow aisles. When transporting loads, the
auxiliary lift* must always be fully lowered.
DANGER
Danger of tilting forward
During picking work, goods for transport, and
therefore weight, accumulates on the load support.
Because picking is a manual process, the truck
control unit cannot monitor it and therefore also
cannot warn of overloading. The operator must
ensure that the load capacity of the order picker is
not exceeded during picking work.
Additional lift
Before actua
ting the control rocker using (1) or
(2), first pre
ss the selection key for the auxiliary
lift (3).
68 5
212 804 3001 EN - 02/2017
To Next Page
Loading...
Need help?
General
