STINGER ELECTRONICS (PTY) LTD BS120 INSTRUCTION MANUAL REF:03/2018
Printed: 4/26/2019 Page 3 of 20
Control Inputs/Outputs on the Energizer unit:
External Siren connection : Contacts available for 12V/10W Siren. On—Time3 minutes or
terminated on “reset”.
Silent alarm connection : Contacts available for a 12V, max 1A load.System has to be reset
before a new alarm can be triggered.
Gate monitor connection : Input for n/c gate contact.
Alarm system : HV current monitoring system. A sequence of 3 identical faults
occurring in the same zone isrequired before an alarm condition will be
reported.
WINDOWS SOFTWARE PACKAGE
This package has been specifically designed for the ”Stinger” BS120 system, used on large sites with a
number of ”Stinger” units. The software is extremely versatile and is yet user friendly to the average
operator.
The program has the following general features
Can be loaded onto all modern machines and is Windows95/98/2000/NT/XP
compatible.
Communicates via the computer comm. port and
an RS485 to RS232 converter with up to 125 BS120 units via a two wire cable, RF data link or fibre optic
cable.
Full control of all units is possible via simple configure and setting-up windows.
Up to 125 site maps can be imported, indicating on the screen the physical positions of the”Stinger”
units and the Electric fence zones at the perimeter.
The location and the type of alarm condition will be shown at the site map for quick reaction by the
security personnel.
An alarm will be raised to alert the operator.
Feedback systems are built into the software to monitor the reactions of the
operating personnel.
A log file keeps record of all events and fence conditions and is available for later
retrieval. A printout can be made anytime of any part of this file.
Extensive protection in the software to counteract tampering with logged data.
The HV outputs of ”Stinger” units can be individually programmed to switch to high or low voltage at
selectable times and days.
It is possible via this program to synchronise a number of BS120 units to comply with Government
regulations.
The contents of the “Log file” can be downloaded to a remote computer if a telephone modem has been
installed.
Optional peripherals
- Mains modem for activating floodlights per zone or to communicate with a remote control unit via
mains communication.
- 600 mW UHF TransceiverWith FSK modem. Can be used for data communication overdistances
up to 4 Km and more.
- Relay card. Provides 25 relay contact outputs for interfacing to e,g, existing alarm system, lights
etc.
- Stinger program extension is available to provide full SMS facility.
To Next Page
Loading...