Stocker 432 - Operating Controls and Clock; Function Keys Overview; Clock Setting Procedure

72 73
Art. 432
Geyser Nebulizer E-25 MI 21 V
Art. 432
Geyser Nebulizer E-25 MI 21 V
For further information about the product, please contact info@stockergarden.com.
Assembly and useAssembly and use
Use the control keys to:
Functioning
Keys Description
turn the nebulizer on/off;
activate the SETTING mode of the nebulizer;
set the frequency of the cycles;
set the duration of the cycles and the engine power level;
start spraying, saving the duration and frequency selections.
Clock configuration
1. 1. Press the start button to turn on the nebulizer;
2. 2. Press the
key for 5 seconds. The clock on the display will start flashing at the top
right;
3. 3. Use the keys
and to change the hours between 00 and 23 and press the Play key
to confirm. Press and hold the keys and makes the display show the selectable
values faster and continuously;
4. 4. Use the keys
and to change the minutes between 00 and 59 and press the Play key
to confirm;
5. 5. The clock at the top right of the display will stop flashing and will be set. (Only the „ : „
will continue to flash to show the seconds running)
The control display can keep the memory of the time set on the clock for 180 days even
without power from the main 21 V Power Line battery. The battery inside the display recharges
automatically when the 21 V Power Line battery is inserted and the machine is running. This
does not affect the autonomy of the main battery.