Need help?Do you have a question about the Stoelting E122 and is the answer not in the manual?
Defines the safety alert symbol used to indicate danger, warning, or caution for personal injury avoidance.
Explains signal words like WARNING, CAUTION, and NOTICE used to alert readers to hazards.
Provides a general overview of the Stoelting E122 & F122 countertop gravity-fed machines.
Details the dimensions, electrical, compressor, motor, and volume specifications for the E122 model.
Details the dimensions, weight, electrical, compressor, motor, and air flow specifications for the F122 model.
Emphasizes reading and understanding all safety precautions and warning labels before operation or maintenance.
Outlines how to check for damage during transit and the carrier's responsibility for any damages.
Covers unpacking, determining location, and leveling the machine for proper operation and drainage.
Guides the user through routing tubing, connecting water and syrup lines for the auto-fill pump.
Details setting model, contact, and time/date information using a USB drive for the IntelliTec2 control system.
Lists essential safety rules for operators, emphasizing knowing the machine and staying alert.
Identifies and explains the function of various operating controls on the machine, including the IntelliTec2 touchpad, spigot switch, and consistency adjustment.
Provides step-by-step instructions for safely draining mix from the machine's freezing cylinder.
Details the procedure for disassembling various machine parts for cleaning or maintenance.
Outlines the steps for cleaning and sanitizing machine components according to health codes and manufacturer instructions.
Provides instructions for reassembling machine components after cleaning, including lubrication points.
Details the process for sanitizing the machine, emphasizing correct solution strength and contact time.
Explains the time required to serve product after filling and how to dispense correctly to avoid issues.
Discusses how mix variations can affect product quality and machine performance.
Provides instructions for cleaning the machine's exterior to maintain its finish.
Recommends daily, weekly, and semi-annual maintenance tasks for optimal machine performance.
Details how to clean the condenser filter for F122 models to ensure proper airflow and prevent compressor damage.
Provides specific instructions for sanitizing the autofill system after cleaning.
Outlines the steps for preparing the machine for long-term shutdown, including cleaning and disassembly.
Lists common error codes displayed on the control panel and their corresponding malfunctions.
Provides solutions for specific error codes like High Torque (E2), Run Time (E3), Clean (E4), Freezing Cylinder Sensor (E5), Drive Motor (E7), and Spigot Open Time (E21).
Addresses common machine problems like not running, not shutting off, product consistency issues, and leaks with possible causes and remedies.
Helps diagnose issues with the autofill pump, such as not operating or incorrect syrup concentration.
Lists part numbers for various decals used on the machine and lubrication products like Petrol Gel.
Provides a visual breakdown and part numbers for components related to the auger shaft and faceplate assembly.
Lists part numbers for various components of the machine's hopper, including covers, grids, and regulators.
Lists part numbers for components of the auto fill system, including clamps, connectors, fittings, and tubing.
Discusses the application of Arctic Quake products with the F122 freezer, including cleaning frequency recommendations.
Defines the warranty's scope, period, and disclaims implied warranties of merchantability or fitness for purpose.
Outlines the remedies available, conditions for claims, and responsibilities of the buyer and Stoelting.
Specifies the part warranty and labor warranty periods for different equipment components and types.
Lists conditions for warranty validity and exceptions, such as costs not covered and excluded parts.
Details limitations of liability for consequential damages and specific exclusions from warranty coverage.
To Next Page
General
