Stokke PIPA - Stroller Integration; Compatible Stokke Strollers; Attaching Seat to Stroller

Stokke® PIPA™ by Nuna® 37EN
Using the Stokke® pipa™ by Nuna® with a stroller from Stokke
The Stokke® pipa™ by Nuna® can only be used on the following strollers:
Stokke® Xplory®, Stokke® Crusi™, Stokke® Scoot™ (only from serial no 118AA0040583) and
Stokke® Trailz™.
Installation on a stroller
• Align the car seat attachment housings above the stroller attachment arms and move
straight down, click (2x) ! Green dots on both sides indicate that the seat is properly
fastened.
click
click