- 7 -
Technical Data
Machine Sound & Vibration Mea-
surements/Lubrication Specs
Lubrication Specifications
Re comme nded Fuel Gasoline 86 Octane minimum
Engine Oil
Mobil Delvac 1200 10W30, approximately
1.3 quarts/1.2 liters
(check engine manual)
Gear Case
Mobilube HD80W-90 API GL-5
40 ounces/1.2 liters
Grease Fittings
Mobilegrease XHP222
(NLGI 2EP Lithium Complex)
Sound and Vibration Measurements
Sound Pressure Values as measured are per the following:
Noise 1 Model/Configuration
Sound Pressure CF364
5.5 Honda
CF464
8 Honda
CF484
11 Honda
at operator’s ear
92dBA 93dBA 93dBA
RMS acceleration on the handle were measured per the following:
meter/sec
2 RMS
8.27 1.5
Sound and vibration values have been taken in accordance to the EEC machine regulation
(edition 93/68/EEC)
Sound Pressure measurements were taken with Simpson model 886-2 type 2 meter, calibrated
1/31/98
1/17/2003
Acceleration measurements were taken with Quest Tech model VI-100 meter, calibrated 4/17/96
1/17/2003
Sound and vibration measurements were obtained with machine operating at maximum engine
speed of 3600 RPM.
Unit measurements were taken on steel test plate.