Need help?Do you have a question about the Storz & Bickel GMBH VOLCANO CLASSIC and is the answer not in the manual?
General| Type | Desktop Vaporizer |
|---|---|
| Heating System/Method | Convection |
| Weight | 1.8 kg |
| Warranty | 3 years |
| Compatibility | Dry Herb |
| Temperature Range | 40°C - 230°C (104°F - 446°F) |
| Power Supply | AC Power |
Highlights mandatory instructions to avoid injuries and equipment damage.
Explains symbols used in the manual for user safety and information.
Provides technical information or useful tips regarding the Vaporization System.
Instructions for unpacking the device and checking components.
Guidance on placing and connecting the Hot Air Generator to the mains.
Explains the intended use and general operation of the device.
Details on cleaning and maintaining the Hot Air Generator.
Instructions on how to properly store the Hot Air Generator.
Steps to take when encountering issues with the device.
A table listing common problems and their possible solutions.
Lists technical details such as voltage, wattage, dimensions, and weight.
Steps for preparing and connecting the VOLCANO DIGIT for first use.
Explains how the device heats up and indicates when the temperature is reached.
Details on adjusting the desired vaporization temperature using buttons.
Steps for preparing and connecting the VOLCANO CLASSIC for first use.
Explains how the device heats up and indicates when the temperature is reached.
Guidance on setting the desired vaporization temperature using the regulator knob.
Instructions for attaching and using the EASY VALVE system.
Procedures for cleaning the EASY VALVE balloon and mouthpiece.
Steps to take apart the Filling Chamber for cleaning or maintenance.
Instructions on how to reassemble the Filling Chamber after cleaning.
Details on using the Filling Chamber Reducer accessory.
Instructions for filling and using Dosing Capsules and the Magazine.
Guidance on the hygienic use and disposal of disposable lip pieces.
Instructions for filling the chamber and attaching the valve for the SOLID VALVE.
Procedures for cleaning the SOLID VALVE parts.
Steps to disassemble the mouthpiece for cleaning.
Instructions on how to take apart the valve mechanism.
Steps to disassemble the Filling Chamber Insert for cleaning.
How to prepare the Filling Chamber when using the Liquid Pad.
Instructions for applying extracts to the Liquid Pad.
How to clean the Liquid Pad after use.
Covers manufacturer warranties, limitations, and terms for the products.
Explains user liability, company limitations, and the extent of liability for damages.
Information on post-warranty repair services and document copyright.
To Next Page
