KARL STORZ GmbH & Co KG, Mittelstr. 8, 78532 Tuttlingen, Germany V 2.0.0_01-2015
Step 1: System Assembly and Activation
Insert the electronic module into the handle on the video laryngoscope.
Step 2:
Insert the electronic module plug that matches the
connection socket on the monitor (color coded).
Step 3:
Turn the monitor on using the power button
(Indicator light lights up).
C-MAC
®
:
Easy connect start guide
2
CAUTION: After cleaning/sterilization make sure that all connections
are dry by using oil-free, filtered compressed air or equivalent.
1
NOTE: The blade can be changed during operation while the monitor
is turned on.
Monitor
Charger
96076701E
a
Country-specific adaptors and adaptor cables
Clamp
The optionally available clamp 8401 YB (US: 9700-CLP) can similarly be
mounted to the VESA 75 holder and used to attach the C-MAC
®
monitor to
poles and pole stands.
To Next Page
Need help?
General
